Top-rated roof replacement · 4.9 on Google
Professional Roof
Replacement Services
Ocean Seven Builders provides professional roof replacement services for tile, shingle, metal and flat roofs. Every replacement includes a full tear-off, decking repair where needed, new underlayment and flashing, and a roofing system installed by our own crew.
- Licensed & insured · CSLB #893048 · B-General · C-39 Roofing
- In-house roofing crews
- Written workmanship warranty
Our crew installing new decking on a shingle re-roof
Roof replacement
Professional roof replacement, done from the deck up.
A roof replacement is one of the largest investments most homeowners make in their house, and it is one you should only have to make once in a long while. Done properly, a new roof protects the structure, the interior and everything inside for decades. Done poorly, it can leak within a few seasons, even if it looks perfect from the street.
The difference is almost always in the layers you cannot see. That is why every professional roof replacement we carry out starts with a complete tear-off, so the decking can be inspected and repaired before anything new goes on. Then we install new underlayment, flashing at every wall, valley and penetration, and finally the roofing system itself. As our main roofing contractor page explains, roofing is the trade Ocean Seven began with, and our own crews still do the work.
Not every leak means you need a new roof, however. If a roof repair will solve the problem, we will tell you. Our guide to roof repair or replacement explains how to tell the difference, and a roof inspection gives you a clear answer for your own home.
- Complete tear-off down to the decking
- Decking repair or replacement where needed
- New underlayment, flashing and ventilation details
- Tile, shingle, metal or polyurethane foam systems
Roof replacement explained
A homeowner’s guide to professional roof replacement.
Why a full tear-off is worth it
Some contractors offer to lay a new roof over the old one to save time. It can look like a bargain, yet it hides the very things a replacement should fix. Damaged decking stays in place, old flashing is buried rather than replaced, and the extra weight sits on the structure for the life of the roof. In addition, problems that develop later are harder to trace through two layers. That is why every professional roof replacement we carry out starts with a complete tear-off down to the deck, so we can see what is really there and repair it before anything new is installed.
The decking is the foundation of the roof
Decking is the sheathing the whole roofing system is fastened to. When it has absorbed water over the years, it softens, delaminates or rots, and fasteners no longer hold properly. Because the true condition is only visible after tear-off, a good proposal explains how decking replacement will be handled and priced. Once sound decking is in place, the new roof has a solid base that will hold for decades.
Underlayment and flashing do the real waterproofing
On most pitched roofs, the underlayment is the actual waterproof barrier; the tile or shingle on top mainly protects it from sun and weather. For this reason, a tile roof can leak even when every tile looks perfect. Flashing is just as important. Walls, chimneys, skylights, vents and valleys are where roofs most often leak, so new flashing at every transition is part of every replacement we do, rather than an optional extra.
Choosing the best material for your new roof
A replacement is the ideal moment to reconsider the roofing material. Tile suits Spanish and Mediterranean homes, but switching to tile from a lighter roof requires a structural check first. Architectural shingle works on most pitched roofs and comes in a wide range of colors. Standing seam metal gives modern homes clean lines, and seamless polyurethane foam is the best choice for many flat and low-slope roofs. Our roofing materials guide compares the options, and this article explains how to choose.
Ventilation, edges and the finishing details
A roof that cannot breathe traps heat and moisture in the attic, which shortens the life of the roofing and the decking beneath it. Therefore, roof vents are checked and replaced where needed, drip edges are installed to direct water into the gutters, and gutter connections are finished properly. These details are easy to skip and expensive to fix later.
What to expect on installation day
On the day the work begins, our crew protects landscaping and walkways, then removes the old roof section by section so the house is never left exposed longer than necessary. Decking is repaired, underlayment and flashing are installed, and the new roofing system follows. The site is cleaned at the end of every day. Finally, we complete the final inspection with you and hand over the written workmanship warranty along with the manufacturer’s warranty documentation.
Related roofing services
Talk with a professional
Get honest advice and a fixed, line-item proposal from a top-rated team.
When to replace
Signs your roof needs replacing.
One of these signs on its own may only call for a repair. Several of them together usually mean the roof has reached the end of its life.
Leaks in several places
Leaks that appear in different rooms, or return after each storm, point to a roof that is failing as a whole.
Worn-out underlayment
On tile roofs, the underlayment usually fails before the tile. When it does, water gets in even though the tiles look fine.
Curling or missing shingles
Shingles that curl, crack or blow off across the roof show that the material is breaking down.
Granules in the gutters
Heavy granule loss leaves shingles exposed to sun and rain, which speeds up the wear.
Soft or sagging decking
Spongy spots or visible sagging suggest the decking has absorbed water and needs replacing.
Repeated repairs
When you are patching the same roof every winter, those repair bills often add up to more than a replacement.
Ponding on flat roofs
Water that stays on a flat roof for days after rain wears the surface and finds its way into seams.
An aging roof
A roof near the end of its expected life is worth replacing on your schedule rather than after a major leak.
Not sure which applies to your roof? Book a roof inspection or read about flat roof leaks. If water is already coming in, start with roof leak repair to stop the damage.
What is included
What a professional roof replacement includes.
A roof is a system of layers, and each one has a job. This is what goes into every roof replacement we carry out.
Tear-off, new decking and underlayment on a recent re-roof
Inspection and documentation
Before any proposal, we inspect the roof surface, flashing, drainage and, where accessible, the decking, and we photograph what we find.
Complete tear-off
The old roofing and underlayment are removed down to the decking. Laying a new roof over an old one hides problems instead of fixing them.
Decking repair
Damaged or rotted decking is replaced so the new roof is fastened to a sound base. The proposal explains exactly how decking work is handled.
Underlayment and waterproofing
New underlayment goes over the whole deck, with extra protection in valleys and other areas where water concentrates.
Flashing
New flashing at walls, chimneys, skylights, vents and valleys, because most roof leaks start at these transitions rather than in the open field of the roof.
The new roofing system
Tile, architectural shingle, standing seam metal or polyurethane foam, installed to the manufacturer’s requirements. Compare them in our roofing materials guide.
Ventilation, edges and cleanup
Roof vents, drip edges and gutter connections are finished properly, the site is cleaned every day, and the final inspection is completed with you.
Replacement options
Choosing your new roofing system.
A replacement is the right moment to reconsider the material. The best choice depends on your roof shape, house style and structure.
Often the existing underlayment is replaced and sound tiles are reinstalled, with broken tiles matched. Switching to tile from a lighter material needs a structural check first.
Best for: Spanish and Mediterranean homes
Material reference image
Architectural shingles suit most pitched roofs and come in many profiles and colors, so the new roof can refresh the look of the house.
Best for: ranch, traditional and modern homes
Ocean Seven project
Standing seam metal offers clean lines and concealed fasteners, and it is lightweight, which suits modern homes with simple roof planes.
Best for: contemporary architecture
Material reference image
Seamless polyurethane foam, our specialty, replaces worn flat-roof systems and can be built up to reduce ponding.
Best for: flat and low-slope roofs
Ocean Seven project
How it works
How a roof replacement runs.
Five clear steps from the first inspection to the final walkthrough, so you always know what happens next.
Inspection & recommendation
We inspect the roof and explain, with photos, whether replacement is truly needed or whether a repair will do.
Line-item proposal
You receive a fixed proposal listing the roofing system, underlayment, flashing and decking work, so nothing is buried in a lump sum.
Permit & scheduling
Where your city requires a permit, we coordinate it, then schedule the work around the weather and the required inspections.
Tear-off & installation
Our crew removes the old roof, repairs decking, installs underlayment, flashing and the new system, and cleans up every day.
Final inspection & warranty
We walk the finished roof with you, complete the final inspection and hand over the warranty documentation.
Planning your budget
What affects the cost of a roof replacement.
Every roof is different, so we do not quote prices without seeing it. These are the factors that drive the cost of a roof replacement.
Roof size and shape
Larger roofs, steeper pitches and complex shapes with many valleys and hips take more material and labor.
The roofing material
Tile, shingle, metal and foam differ in material cost, installation method and the structure they require.
Decking condition
The amount of damaged decking is only fully known after tear-off, which is why the proposal explains how it is handled.
Layers to remove
A roof with more than one existing layer takes more time and disposal to tear off.
Flashing and penetrations
Chimneys, skylights, solar mounts and vents all need careful flashing and add detail work.
Access and permits
Site access, steep slopes and city permit requirements also influence the overall cost and schedule.
How we price it: after an inspection, you receive a fixed, line-item proposal that lists each part of the work separately. If you also need to plan a larger project, our permit guide explains what to expect from the city.
Why Ocean Seven
Why homeowners choose our top-rated roof replacement team.
The reasons are practical and easy to check: who does the work, how it is priced and how the company stands behind it.
Roofing is our origin trade
The company began as a roofing crew, and roofing is still a core specialty.
Honest recommendations
If a repair will do the job, we say so. Replacement is recommended only when it is the better long-term value.
Our own crews
Our roofers are employed directly, so the people on your roof work for us.
Licensed, bonded & insured
CSLB License #893048, B-General and C-39 Roofing. You can verify it with the Contractors State License Board.
What clients say
What homeowners say about their new roofs.
Selected excerpts from public Google and Yelp reviews of Ocean Seven Builders, quoted as written.
After looking at various roof choices and meeting many roofers, thank goodness I met Ron. He was really easy to deal with and explained everything really well. … He does not use subs, his people work for him.
Kenny MacPherson
Google review · Roof replacement
Really happy we chose Ocean Seven Builders for our roof replacement. Ron made the process easy from start to finish. He kept us updated, especially when there were small delays due to weather, which I appreciated. … No surprises on the final bill either, which is always a relief.
Verena Marcos
Google review · Roof replacement
I highly recommend Ocean Seven Builders for anyone needing a roof replacement. Ron and his team were excellent to work with. What impressed us most was their communication and professionalism.
Jan G.
Yelp review · Roof replacement
Homeowner guides
Roofing guides for homeowners.
Reading before you replace a roof: repair or replace, choosing the best material, flat roof leaks and permits.
Roofing Guides
November 10, 2026
Roofing Guides
November 5, 2026
Roofing Guides
October 27, 2026
Roofing FAQ
Roofing questions, answered by professionals.
Repair or replace, which material, permits, leaks and warranties: straight answers from a roofing contractor that started as a roofing crew.
How do I know if my roof needs repair or replacement?
Isolated problems, such as a failed flashing or a small damaged area, can usually be repaired. However, when leaks keep returning, the underlayment has reached the end of its life, or the decking is soft in several places, replacement is normally the better long-term value. An inspection tells you which situation you are in. Learn more about roof repair and roof replacement.
What roofing materials do you install?
We install clay and concrete tile, architectural asphalt shingle, standing seam metal and seamless polyurethane spray foam for flat and low-slope roofs. Each suits a different roof shape and house style, so our guide to the best roof for Los Angeles homes and our page on roofing materials & options compare them.
What is a polyurethane foam roof?
Polyurethane foam is sprayed on as a liquid, expands into a seamless surface and is then protected with a coating. Because there are no seams to fail, it is well suited to flat and low-slope roofs where water would otherwise collect. It is the company’s roofing specialty.
How long does a roof replacement take?
It depends on the size of the roof, the system, the tear-off and the weather. As a guide, the company’s typical range for a polyurethane foam re-roof is two to five days. Your schedule is confirmed in the proposal after an inspection.
Do I need a permit to replace my roof?
In most Los Angeles-area cities, a roof replacement requires a permit and inspections. We coordinate the permit and inspections as part of the project. Our guide to home improvement permits in Los Angeles explains the process.
Can you find and fix a roof leak?
Yes. A ceiling stain is not always directly under the leak, because water travels along decking and framing first. We trace the source, which is often flashing, a roof penetration or a valley, and then repair it. See roof leak repair.
Do you offer roof inspections?
Yes. An inspection looks at the roof surface, flashing, penetrations, drainage and, where accessible, the decking and underlayment. It is also the first step before any repair or replacement proposal. See roof inspections.
Can you help with a roof insurance claim?
The company lists insurance claim work as part of its roofing service. We can inspect and document the damage and prepare a scope of repair. Coverage decisions, however, are made by your insurance company.
What happens if the wood under my roof is damaged?
Damaged decking is replaced before the new roof goes on, because a new roof is only as sound as what it is attached to. The proposal explains how decking replacement is handled so there are no surprises.
Can I switch from shingles to tile?
Often, yes. Tile is considerably heavier than shingle, though, so the roof framing has to be checked first and may need strengthening. We confirm this before you commit. Learn more about tile roofing and shingle roofing.
Do you work on flat and low-slope roofs?
Yes. Flat and low-slope roofs are a core part of the company’s roofing work, including seamless polyurethane foam systems. See flat & low-slope roofing.
What warranty comes with a new roof?
Every project carries a written workmanship warranty, along with the manufacturer’s warranty on the roofing system. Specific terms and periods are set out in your contract.
Where we work
Service areas across Los Angeles & beyond.
As a Los Angeles general contractor based in Van Nuys, we serve homeowners across Los Angeles County, Orange County, San Bernardino County and Marin County.
Los Angeles County
- Agoura Hills
- Alhambra
- Altadena
- Arleta
- Bel Air
- Beverly Glen
- Beverly Hills
- Brentwood
- Burbank
- Calabasas
- Canoga Park
- Cerritos
- Eagle Rock
- Encino
- Glendale
- Hawthorne
- Hidden Hills
- Highland Park
- Hollywood
- La Cañada Flintridge
- Lake Balboa
- Lakewood
- Malibu
- Manhattan Beach
- Marina del Rey
- Mission Hills
- Monrovia
- Newhall
- North Hollywood
- Panorama City
- Pasadena
- Redondo Beach
- Reseda
- San Gabriel
- Santa Monica
- Sherman Oaks
- Sierra Madre
- South Pasadena
- Studio City
- Tarzana
- Valley Glen
- Valley Village
- Van Nuys
- Venice
- West Hollywood
- Winnetka
- Woodland Hills
Orange County
San Bernardino County
Marin County
Ventura County
Riverside County
One office, not a network of branches. Everything runs out of 15155 Stagg St Unit # 2, Van Nuys, CA 91405. These are the areas our crews travel to; there is no branch office in any of them.
Homeowner guides
From the Ocean Seven blog.
Practical guides from a Los Angeles general contractor on roofing, additions, kitchens and permits, so you can plan your project with confidence.
New Construction Guides
November 15, 2026
Room Addition Guides
November 13, 2026
Bathroom Remodeling Guides
November 12, 2026
Start your project
Talk with a Los Angeles general contractor.
Tell us roughly what you have in mind. Then we will come out, measure, listen and send a fixed line-item proposal, free and with no pressure attached.
Phone
Office
Ocean Seven Builders, Inc.
15155 Stagg St Unit # 2
Van Nuys, CA 91405
Get directions
Hours
Monday–Friday 7:00am–7:00pm
Saturday 8:00am–4:00pm · Sunday closed
License
CSLB #893048 · B-General · C-39 Roofing
Licensed, bonded & insured
Request a consultation
Six quick fields. A sentence or two about the project is plenty.