Short answer: a tub-to-shower conversion is usually the right upgrade when the tub is rarely used, stepping over the tub wall has become awkward, or you want a larger, easier-to-clean shower in the same footprint. It is usually worth keeping a tub when young children bathe in it, when someone in the household relies on soaking, or when this is the only tub in the home and resale matters to you. The work itself involves more than swapping fixtures: the drain is relocated or adapted, the valve changes, the floor is built with a slope, and a continuous waterproofing system goes in before tile.
A tub-to-shower conversion replaces a bathtub with a walk-in shower, usually within the same footprint. It is a popular upgrade for bathrooms where the tub rarely gets used, and the result is often a bathroom that feels larger, cleaner and easier to use. It is not the right choice for every home, though, so it is worth weighing the options before demolition starts.
This guide covers the benefits, the trade-offs, how to think about resale, what the conversion physically involves, accessibility features to consider, cost factors and permits. For the technical side of the new shower, see our walk-in shower remodel guide, and for the full service, our tub-to-shower conversions page.
Benefits of converting a tub
- Easier entry without stepping over a tub wall
- A more open look, especially with clear glass
- Simpler cleaning with fewer corners and caulk joints
- Room for built-in niches, benches and better lighting
- The option of a curbless or low-curb entry and a hand shower for seated use
In a typical tub alcove, the shower takes over the tub’s footprint, so the bathroom does not have to grow for the shower to feel more generous. Removing the tub’s high wall alone often makes a small bathroom look larger, particularly with a frameless glass panel instead of a curtain.
Four options compared
Converting is not the only way to improve a tired tub-shower combination. Before deciding, it helps to compare the realistic options side by side.
| Option | Works well when | Trade-off |
|---|---|---|
| Convert the tub to a walk-in shower | The tub is rarely used and the household mainly showers; easier entry is a priority | No tub in this bathroom; drain and valve work is required |
| Keep a tub-shower combination, upgraded | Children bathe in the tub, or this is the only tub in the home | Still a step over the tub wall; shower space stays limited by the tub |
| Replace with a new soaking tub and separate shower | The room is large enough for both, often in a primary bathroom | Uses the most floor area and adds plumbing |
| Convert this bathroom, keep a tub in another | The home has two or more bathrooms and a hall bath can keep the tub | Requires deciding which bathroom serves bathing needs |
When to keep a bathtub
If there are young children in the home, a tub is often still useful for bathing. Some people also rely on soaking for comfort or recovery, and that daily value outweighs the convenience of a shower. Some buyers expect at least one bathtub in the house, so if this is your only bathroom with a tub, consider keeping one elsewhere or converting a different bathroom instead. If you do want a tub as a feature, our bathtubs and freestanding tubs page covers the options.
Thinking about resale
The resale question is less about this one bathroom than about the whole house. A home with a tub in a hall or secondary bathroom can usually convert the primary bathroom tub to a shower without narrowing its appeal. A home whose only tub is being removed is a different case, and that decision should be deliberate. If you plan to stay for many years, how the household lives in the bathroom every day may matter more than a future buyer’s preferences. If you are not sure, converting the primary bathroom and keeping a tub in the hall bathroom is a common middle ground.
What the conversion involves
A tub-to-shower conversion is a real remodel of the wet area, not a fixture swap. The typical sequence:
- Demolition: the tub and surrounding tile or surround are removed down to the framing and subfloor or slab.
- Drain work: a tub drain sits at one end of the alcove, while a shower drain is usually placed in the floor of the shower area. The drain is relocated or adapted, and on a slab foundation that may require cutting the slab.
- Valve and supply changes: the tub spout and diverter go away, the shower valve may be replaced, and the shower head is often raised. This is the time to add a hand shower or a second head.
- Framing: the opening is framed for the new shower, including curbs, niches, a bench and blocking for future grab bars.
- Floor slope and waterproofing: the floor is built to slope to the drain, and a continuous waterproofing system is installed on the floor and walls and joined to the drain.
- Tile, glass and fixtures: tile is set, the glass is measured and installed after tile, and fixtures are trimmed out.
The condition of what is behind the tub often decides how much work is involved. Old drain lines, a water-damaged subfloor around the tub or framing that was wet for years are common findings in older homes and should be addressed before the new shower is built.

Design choices to make early
- Curbless or low-curb entry
- Fixed glass panel or hinged door
- Tile size and slip resistance for the floor
- Niche and bench locations
- Valve, shower head and hand shower positions
- Center drain or linear drain
Each of these affects how the shower is framed and plumbed, so they should be settled before demolition rather than after. A curbless entry, for example, may require recessing the shower floor, which depends on the floor structure. A linear drain allows a single slope and suits large-format tile. Our walk-in shower guide explains these choices in detail, and our tile and finishes page shows material options.
Accessibility and aging in place
For many homeowners, the main reason to convert is easier entry. If that is your goal, build it in deliberately:
- Low or no threshold: a curbless entry, or the lowest practical curb.
- Grab bar blocking: solid wood in the walls lets grab bars be installed securely now or later.
- Seating: a built-in or folding bench placed so the controls are reachable from it.
- Hand shower: a hand-held spray on a slide bar works for seated and standing use.
- Slip resistance: floor tile chosen for grip when wet, often in a smaller format.
- Clear entry width: an opening wide enough for the people who will use it, including anyone with a walker.
The U.S. Access Board’s guide to accessible bathing rooms applies to public facilities rather than private homes, but it is a practical reference. It describes grab bar placement in roll-in showers, notes that shower controls should sit at least one and a half inches above grab bars so they do not interfere with grip, and points out that trench drains and other flush transitions provide better access than a threshold.
What drives the cost of a conversion
- Drain relocation: the distance the drain moves, and whether the home is on a slab or a raised foundation.
- Entry type: curbless entries usually require floor framing or slab work.
- Shower size: staying in the tub footprint or enlarging into the room.
- Waterproofing and tile: the system used, the tile area and the tile type.
- Glass: a single fixed panel, a panel and door, or a full enclosure.
- Valve and fixtures: a new valve, hand shower, multiple heads or thermostatic controls.
- Hidden conditions: water damage or old piping found once the tub is removed.
Water use is a small bonus worth planning for. According to the EPA, standard showerheads use 2.5 gallons per minute, while WaterSense labeled showerheads must use no more than 2.0 gallons per minute.
Permits
Because a conversion changes plumbing, it usually requires a permit, depending on the city and scope. In the City of Los Angeles, LADBS lists a residential bathroom remodel without structural changes and replacing or adding plumbing fixtures among the scopes eligible for an express permit. Homes in other cities or unincorporated Los Angeles County follow their own building department’s rules. Our permit guide explains when permits apply.
Homeowner checklist before signing: decide whether a tub will remain anywhere in the home; confirm where the new drain will be and how it will be reached on your foundation; ask which waterproofing system will be used and whether the pan will be flood-tested; confirm the entry type and glass layout; ask for grab bar blocking even if bars come later; ask how conditions behind the tub are priced if found; and check the contractor’s license on the CSLB website.
How Ocean Seven handles a tub-to-shower conversion
- Assessment. We look at the tub alcove, the drain location, the floor structure and how the bathroom is used.
- Design decisions. Entry type, drain type, glass, niches, bench and fixture positions are settled before demolition.
- Permit, when required. Pulled with the building department that serves your address.
- Demolition, drain and rough-in. The tub is removed, the drain is relocated or adapted, and plumbing is roughed in and inspected.
- Waterproofing and tile. The shower is waterproofed and tested before tile is set.
- Glass, fixtures and closeout. Glass and fixtures are installed, permitted work is inspected and you receive documentation for your records.
Why homeowners choose Ocean Seven for bathroom remodeling
Ocean Seven Builders is a family-owned general contractor based in Van Nuys with over 30 years of industry experience, operating as Ocean Seven Builders since 2007. We are a Licensed California contractor, CSLB #893048 (B General Building, C-39 Roofing). Kitchen and bathroom remodeling are core parts of our work, from small bathroom remodeling and guest bathrooms to complete primary bathroom remodels. We offer online estimates, our team works in English and Spanish, and we serve homeowners across Los Angeles, Orange, Riverside and Ventura counties, including Redondo Beach and Marina del Rey.
Frequently asked questions
Will removing my only bathtub hurt resale value?
It can narrow the home’s appeal to some buyers, especially families with young children, because some buyers expect at least one tub in the house. If the home has another bathroom that can keep a tub, converting the primary bathroom is usually less of a concern. If this is the only tub, weigh daily use against future resale deliberately.
Can a walk-in shower fit in the space of a standard tub?
Yes. Most conversions build the shower within the existing tub alcove, and removing the tub wall makes the space feel larger. Some projects also extend the shower into the room if the layout allows.
Does the drain have to move?
Usually it is relocated or adapted, because a tub drain sits at one end of the alcove and a shower drain is placed in the shower floor. On a slab foundation, moving the drain may require cutting the slab. On a raised foundation, access from the crawlspace is often simpler.
Can I have a curbless shower in a tub conversion?
Often, but it depends on the floor structure. A curbless entry needs the shower floor recessed or the surrounding floor built up to make room for the slope. A low curb is simpler and still gives easier entry than a tub wall.
Do I need a permit for a tub-to-shower conversion in Los Angeles?
Usually, because plumbing changes. In the City of Los Angeles, LADBS lists a residential bathroom remodel without structural changes and plumbing fixture work as express permits. Other cities and unincorporated county areas have their own rules.
What accessibility features are worth adding?
A low or curbless entry, a bench, a hand shower on a slide bar, slip-resistant floor tile and blocking for grab bars are the most common. Adding blocking while the walls are open costs little compared with retrofitting later.
Next steps
Learn more about our tub-to-shower conversions and walk-in shower remodeling services. If the bathroom is your primary suite, read our guide to planning a primary bathroom remodel, or visit our main bathroom remodeling page.
Thinking about replacing your tub? Request a consultation or call (310) 903-7869. Ocean Seven Builders is based at 15155 Stagg St Unit 2, Van Nuys, CA 91405.
Related reading
- Planning a Primary Bathroom Remodel: Layout, Storage and Finishes
- Walk-In Shower Remodel Guide: Waterproofing, Drains and Glass
- Bathroom remodeling services
- Home Improvement Permits in Los Angeles: A Homeowner’s Guide
Sources and further reading
- U.S. Access Board, Guide to the ADA Standards, Chapter 6: Bathing Rooms (grab bars, controls and shower thresholds).
- Los Angeles Department of Building and Safety, Information Bulletin: Express Permits (bathroom remodel and plumbing fixtures).
- U.S. EPA WaterSense, Showerheads.
- Tile Council of North America, TCNA Handbook for Ceramic, Glass and Stone Tile Installation.
- Contractors State License Board, Contracts and binding agreements.
What homeowners say on Google
4.9 out of 5 from 33 Google reviews (as shown on Google, November 12, 2026)
Our home needed a new roof badly, and while we were already remodeling, we decided to update the master bathroom too. Ocean Seven Builders handled both projects and did an incredible job. Ron coordinated everything so well that we never felt overwhelmed even with two major projects happening together. The bathroom d...
Ocean Seven Builders did an amazing job replacing our asphalt shingle roof. We had been putting this project off for years because we were worried it would turn into a stressful mess, but Ron made the process simple from start to finish. He was patient while we compared shingle colors and answered every little quest...
Super happy we went with Ocean Seven Builders for our addition project. We met with a few companies before deciding, but Ron felt the most honest and straightforward. No weird sales pressure, just normal conversations and realistic expectations. The project stayed pretty close to schedule and the quality of the work...
Request a consultation
Tell us about your project. We reply by phone or email, or call (310) 903-7869.